Part Number : 4-0092-1 | Manufacturer : Atec Inc | ||
NSN : 5310-01-265-8978 (5310012658978) | |||
Item Name : Washer Bevel | CAGE Code : 09552 | ||
NIIN : 01-265-8978 (012658978) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15929 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 400921 |
Thank you for taking an interest in part number 4-0092-1, that of which is listed with the description Washer Bevel; Manufactured by Atec Inc and listed alongside the NSN 5310012658978, part number 4-0092-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 4-0092-1 | Manufacturer : Atec Inc | ||
NSN Number : 5310-01-265-8978 (5310012658978) | |||
Item Name : Washer Bevel | CAGE Code : 09552 | ||
NIIN : 012658978 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 4-0092-1, that of which is listed with the description Washer Bevel; Manufactured by Atec Inc and listed alongside the NSN 5310012658978, part number 4-0092-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-265-8978 Item PartTypeName: WASHER,BEVEL | 5310 | 012658978 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
4-0092-1 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
ABLZ | FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES | 1.000 INCHES NOMINAL |
ABMB | MINOR THICKNESS | 0.141 INCHES NOMINAL |
ABMC | MAJOR THICKNESS | 0.312 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 1.000 INCHES NOMINAL |
MATT | MATERIAL | IRON MALLEABLE OVERALL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
STYL | STYLE DESIGNATOR | BEVEL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote