| Part Number : AS108-04-66 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-00-151-8677 (5305001518677) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 00-151-8677 (001518677) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AS1080466 | |||
Thank you for taking an interest in part number AS108-04-66, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305001518677, part number AS108-04-66 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
184th air refueling wing
CAGE Code: 3EP27 |
5 11 tactical inc
CAGE Code: 3P4J9 |
|
3 d machining inc
CAGE Code: 09SY7 |
485 engineering installation group
CAGE Code: 13676,14943 |
|
12 volt shop
CAGE Code: Z0JM2 |
3gen corporation
CAGE Code: 3SPS3 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
3d
CAGE Code: 0WY47 |
3m france
CAGE Code: F0347 |
|
5dt inc
CAGE Code: 3BPF1 |
259 holdings ltd
CAGE Code: 431P3 |
|
3m norge a s
CAGE Code: N0447 |
3s group inc
CAGE Code: 07CN0 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
| Part Number : AS108-04-66 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-00-151-8677 (5305001518677) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 001518677 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AS108-04-66, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305001518677, part number AS108-04-66 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-151-8677 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 001518677 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA2630-05-66 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.559 INCHES MINIMUM AND 4.579 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.081 INCHES NOMINAL FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 4.125 INCHES MINIMUM AND 4.141 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.482 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING BALLS IN SHANK |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
