| Part Number : AS126-4-82 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-00-512-6400 (5305005126400) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 00-512-6400 (005126400) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AS126482 | |||
Thank you for taking an interest in part number AS126-4-82, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305005126400, part number AS126-4-82 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS126-4-82 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-00-512-6400 (5305005126400) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 005126400 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AS126-4-82, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305005126400, part number AS126-4-82 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-512-6400 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 005126400 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS126-4-82 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 5.543 INCHES MINIMUM AND 5.563 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN NO. 2 |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 5.125 INCHES MINIMUM AND 5.141 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 5.458 INCHES MINIMUM FIRST HOLE AND 5.474 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING BALLS IN SHANK |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
