| Part Number : 7823864-1-06-25 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-00-929-9212 (5305009299212) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 00-929-9212 (009299212) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 782386410625 | |||
Thank you for taking an interest in part number 7823864-1-06-25, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305009299212, part number 7823864-1-06-25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7823864-1-06-25 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-00-929-9212 (5305009299212) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 009299212 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 7823864-1-06-25, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305009299212, part number 7823864-1-06-25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-929-9212 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 009299212 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7823864-1-06-25 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.339 INCHES MINIMUM AND 0.386 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.921 INCHES MINIMUM AND 1.948 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT BALL GRIP |
| AAUR | GRIP DIAMETER | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM SECOND HOLE AND 0.116 INCHES MAXIMUM SECOND HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 1.562 INCHES MINIMUM AND 1.582 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.790 INCHES MINIMUM SECOND HOLE AND 1.837 INCHES MAXIMUM SECOND HOLE |
| FEAT | SPECIAL FEATURES | TWO SPRING LOADED BALLS IN SHANK AS SELF RETAINING FEATURE |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FS251,FSCM 8827 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
