| Part Number : AS126-4-53 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-01-027-6402 (5305010276402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 01-027-6402 (010276402) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AS126453 | |||
Thank you for taking an interest in part number AS126-4-53, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305010276402, part number AS126-4-53 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS126-4-53 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-01-027-6402 (5305010276402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 010276402 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AS126-4-53, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305010276402, part number AS126-4-53 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-027-6402 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010276402 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS126-4-53 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.278 INCHES MINIMUM AND 0.329 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.731 INCHES MINIMUM AND 3.751 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 3.312 INCHES MINIMUM AND 3.328 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING BALLS IN SHANK 180 DEGREES APART |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
