| Part Number : AS169-3-15 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-01-059-1094 (5305010591094) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 01-059-1094 (010591094) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AS169315 | |||
Thank you for taking an interest in part number AS169-3-15, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305010591094, part number AS169-3-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS169-3-15 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-01-059-1094 (5305010591094) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 010591094 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AS169-3-15, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305010591094, part number AS169-3-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-059-1094 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010591094 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS3369B315 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.262 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.310 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT BALL GRIP |
| AAUR | GRIP DIAMETER | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AGAV | END ITEM IDENTIFICATION | SPEC ITEM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.938 INCHES MINIMUM AND 0.954 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 90000 POUNDS PER SQUARE INCH |
| CQHQ | MINIMUM YIELD STRENGTH | 63000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.237 INCHES MINIMUM AND 1.241 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
