| Part Number : AS301-4-64 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5305-01-132-0512 (5305011320512) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 01-132-0512 (011320512) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AS301464 | |||
Thank you for taking an interest in part number AS301-4-64, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305011320512, part number AS301-4-64 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS301-4-64 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5305-01-132-0512 (5305011320512) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 011320512 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AS301-4-64, that of which is listed with the description Screw Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5305011320512, part number AS301-4-64 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-132-0512 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011320512 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10115303 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 4.000 INCHES MINIMUM AND 4.016 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.391 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
