| Part Number : AS300-4-53 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5306-01-276-1645 (5306012761645) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 01-276-1645 (012761645) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AS300453 | |||
Thank you for taking an interest in part number AS300-4-53, that of which is listed with the description Bolt Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5306012761645, part number AS300-4-53 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS300-4-53 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5306-01-276-1645 (5306012761645) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 012761645 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AS300-4-53, that of which is listed with the description Bolt Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5306012761645, part number AS300-4-53 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-276-1645 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012761645 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LB36-4-53 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.360 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.802 INCHES MINIMUM AND 3.822 INCHES MAXIMUM |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | RETAINER GRIP |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 3.312 INCHES MINIMUM AND 3.328 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | NUT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.692 INCHES MINIMUM FIRST HOLE AND 3.698 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | ALSO CONTAINS PLUNGER LOCATED IN THE THREAD END OF BOLT |
| MATT | MATERIAL | STEEL COMP XM-13 FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
