| Part Number : AS402-5-18 | Manufacturer : Avibank Mfg Inc | ||
| NSN : 5306-01-391-6123 (5306013916123) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 01-391-6123 (013916123) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AS402518 | |||
Thank you for taking an interest in part number AS402-5-18, that of which is listed with the description Bolt Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5306013916123, part number AS402-5-18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS402-5-18 | Manufacturer : Avibank Mfg Inc | ||
| NSN Number : 5306-01-391-6123 (5306013916123) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 84256 | ||
| NIIN : 013916123 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AS402-5-18, that of which is listed with the description Bolt Close Tolerance; Manufactured by Avibank Mfg Inc and listed alongside the NSN 5306013916123, part number AS402-5-18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-391-6123 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 013916123 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 03A095-5-18 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.475 INCHES NOMINAL FIRST HOLE |
| FEAT | SPECIAL FEATURES | FURNISHED WITH CASTELLATED NUT RETAINIGN ELEMENT; RETAINING ELEMENT SHALL BE RELEASED ONLY BY DEPRESSING PLUNGER LOCATED IN THREAD END OF BOLT |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5663 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASK | HEAD STYLE | HEXAGON |
| ANEE | GRIP LENGTH | 1.125 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| AASB | FASTENER LENGTH | 1.505 INCHES MINIMUM AND 1.525 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.390 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
