| Part Number : GS1006C4-19A | Manufacturer : B And B Specialties Inc | ||
| NSN : 5305-01-475-3404 (5305014753404) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1EM77 | ||
| NIIN : 01-475-3404 (014753404) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: GS1006C419A | |||
Thank you for taking an interest in part number GS1006C4-19A, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305014753404, part number GS1006C4-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GS1006C4-19A | Manufacturer : B And B Specialties Inc | ||
| NSN Number : 5305-01-475-3404 (5305014753404) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1EM77 | ||
| NIIN : 014753404 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GS1006C4-19A, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305014753404, part number GS1006C4-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-475-3404 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014753404 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1062C-19A | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ANEE | GRIP LENGTH | 1.312 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.4970 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AGAV | III END ITEM IDENTIFICATION | A/F-18-DCN |
| AASB | FASTENER LENGTH | 1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.110 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
