| Part Number : GS1006C3-4A | Manufacturer : B And B Specialties Inc | ||
| NSN : 5305-01-497-0857 (5305014970857) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1EM77 | ||
| NIIN : 01-497-0857 (014970857) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: GS1006C34A | |||
Thank you for taking an interest in part number GS1006C3-4A, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305014970857, part number GS1006C3-4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GS1006C3-4A | Manufacturer : B And B Specialties Inc | ||
| NSN Number : 5305-01-497-0857 (5305014970857) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1EM77 | ||
| NIIN : 014970857 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GS1006C3-4A, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305014970857, part number GS1006C3-4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-497-0857 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014970857 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1169C3-4A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| AAJD | THREAD CLASS | 3A |
| ABQJ | POINT STYLE | FLAT |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
