| Part Number : NAS5312E3-10 | Manufacturer : B And B Specialties Inc | ||
| NSN : 5305-01-520-9400 (5305015209400) | |||
| Item Name : Screw Machine | CAGE Code : 1EM77 | ||
| NIIN : 01-520-9400 (015209400) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NAS5312E310 | |||
Thank you for taking an interest in part number NAS5312E3-10, that of which is listed with the description Screw Machine; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305015209400, part number NAS5312E3-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS5312E3-10 | Manufacturer : B And B Specialties Inc | ||
| NSN Number : 5305-01-520-9400 (5305015209400) | |||
| Item Name : Screw Machine | CAGE Code : 1EM77 | ||
| NIIN : 015209400 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS5312E3-10, that of which is listed with the description Screw Machine; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305015209400, part number NAS5312E3-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-520-9400 Item PartTypeName: SCREW,MACHINE | 5305 | 015209400 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5312E3-10 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | III END ITEM IDENTIFICATION | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.545 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.625 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2700METHOD 1,TYPE2 ASSN STD ALL TREATMENT RESPONSES OR AMS2700METHOD 1,TYPE 8,CLASS1 ASSN STD ALL TREATMENT RESPONSES |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,100 DEGREE FLUSH HEAD,FULL THREAD,SIX LOBE RECESS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
