| Part Number : NAS5316E3P8J | Manufacturer : B And B Specialties Inc | ||
| NSN : 5305-01-530-2414 (5305015302414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 62206 | ||
| NIIN : 01-530-2414 (015302414) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS5316E3P8J, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305015302414, part number NAS5316E3P8J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS5316E3P8J | Manufacturer : B And B Specialties Inc | ||
| NSN Number : 5305-01-530-2414 (5305015302414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 62206 | ||
| NIIN : 015302414 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS5316E3P8J, that of which is listed with the description Screw Close Tolerance; Manufactured by B And B Specialties Inc and listed alongside the NSN 5305015302414, part number NAS5316E3P8J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-530-2414 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015302414 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5316E3P8J | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CQBC | Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH |
| ABQJ | Point Style | FLAT |
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| ABQZ | Internal Drive Style | TORX |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| SFTT | Surface Treatment | CADMIUM OVERALL OR PASSIVATE OVERALL |
| CMLP | Thread Quantity Per Inch | 32 |
| MATT | Material | STEEL CORROSION RESISTING OVERALL |
| THSD | Thread Series Designator | UNJF |
| AASA | Thread Length | 0.338 INCHES NOMINAL |
| AASB | Fastener Length | 0.838 INCHES NOMINAL |
| AAUR | Grip Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| AASL | Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ANEE | Grip Length | 0.500 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| AAUJ | Spline Major Diameter | 0.155 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | SCREW, CLOSE TOLERANCE. |
| FEAT | Special Features | END SHALL BE FLAT AND CHAMFERED PLUS INCOMPLETE THREAD NOT TO EXCEED TWO PITCHES. |
| AAUM | Locking Feature | PATCH LOCKING FEATURE |
| MDCL | Material Document And Classification | A286 CONFORMING TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737, OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAVA | Point Diameter | 0.189 INCHES MINIMUM |
| AAJD | Thread Class | 3A |
| STDC | Surface Treatment Document And Classification | AMS-QQ-P-35 OR CADIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 3. ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
