| Part Number : 113B4217P1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN : 5315-00-974-0786 (5315009740786) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 89954 | ||
| NIIN : 00-974-0786 (009740786) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 113B4217P1, that of which is listed with the description Pin Grooved Headed; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5315009740786, part number 113B4217P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 113B4217P1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN Number : 5315-00-974-0786 (5315009740786) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 89954 | ||
| NIIN : 009740786 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 113B4217P1, that of which is listed with the description Pin Grooved Headed; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5315009740786, part number 113B4217P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-974-0786 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 009740786 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 113B4217P1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 1.723 INCHES MINIMUM AND 1.767 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.342 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 2.300 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |
| ABPE | UNDERCUT RADIUS | 0.003 INCHES MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.742 INCHES MINIMUM AND 1.784 INCHES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES HEAD TOP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES SHANK END |
| HGTH | HEIGHT | 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
