| Part Number : 892C796P1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN : 5905-00-864-5535 (5905008645535) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 89954 | ||
| NIIN : 00-864-5535 (008645535) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 892C796P1, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5905008645535, part number 892C796P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 892C796P1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN Number : 5905-00-864-5535 (5905008645535) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 89954 | ||
| NIIN : 008645535 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 892C796P1, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5905008645535, part number 892C796P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-864-5535 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008645535 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 892C796P1 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABPA | UNDERCUT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABXF | SHAFT LENGTH | 0.920 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.666 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.560 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.0007 INCHES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 38.88 KILOHMS SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 80.0 SINGLE SECTION AND 170.0 SINGLE SECTION AND 260.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/0.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| TEST | TEST DATA DOCUMENT | 89954-892C796 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
