| Part Number : 926C327-1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN : 5990-00-943-0316 (5990009430316) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 89954 | ||
| NIIN : 00-943-0316 (009430316) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 15289 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 926C3271 | |||
Thank you for taking an interest in part number 926C327-1, that of which is listed with the description Synchro Control Transformer; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5990009430316, part number 926C327-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 926C327-1 | Manufacturer : Bae Systems Controls Inc | ||
| NSN Number : 5990-00-943-0316 (5990009430316) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 89954 | ||
| NIIN : 009430316 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number 926C327-1, that of which is listed with the description Synchro Control Transformer; Manufactured by Bae Systems Controls Inc and listed alongside the NSN 5990009430316, part number 926C327-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-943-0316 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 009430316 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 926C327 | C | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.8300 INCHES MINIMUM AND 1.8800 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.0933 INCHES MINIMUM REAR SHAFT AND 0.0935 INCHES MAXIMUM REAR SHAFT |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM FRONT SHAFT AND 0.1247 INCHES MAXIMUM FRONT SHAFT |
| ABXF | SHAFT LENGTH | 0.2090 INCHES MAXIMUM REAR SHAFT |
| ABXF | SHAFT LENGTH | 0.4000 INCHES MINIMUM FRONT SHAFT AND 0.4300 INCHES MAXIMUM FRONT SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AJSL | BODY SIZE | 8 |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.00 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS MAXIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 NOMINAL MILS AND 0.0430 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| CQTM | TERMINAL LOCATION | SIDE |
| CRSJ | SHAFT TYPE | ROUND BOTH SHAFTS |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| FEAT | SPECIAL FEATURES | REAR SHAFT DIM. 0.2090 IN. MAX LG,0.0933 IN. MIN,0.0935 IN. MAX DIA |
| TEST | TEST DATA DOCUMENT | 89954-926C327 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
