| Part Number : 1291-163-1 | Manufacturer : Bae Systems Inc | ||
| NSN : 5306-01-096-7343 (5306010967343) | |||
| Item Name : Bolt Internal Wrenc | CAGE Code : 72314 | ||
| NIIN : 01-096-7343 (010967343) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 12911631 | |||
Thank you for taking an interest in part number 1291-163-1, that of which is listed with the description Bolt Internal Wrenc; Manufactured by Bae Systems Inc and listed alongside the NSN 5306010967343, part number 1291-163-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1291-163-1 | Manufacturer : Bae Systems Inc | ||
| NSN Number : 5306-01-096-7343 (5306010967343) | |||
| Item Name : Bolt Internal Wrenc | CAGE Code : 72314 | ||
| NIIN : 010967343 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 1291-163-1, that of which is listed with the description Bolt Internal Wrenc; Manufactured by Bae Systems Inc and listed alongside the NSN 5306010967343, part number 1291-163-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-096-7343 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 010967343 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1291-163-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.160 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.440 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.110 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 2 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| MATT | MATERIAL | STEEL COMP 410 OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
