| Part Number : 228071P2 | Manufacturer : Bae Systems Inc | ||
| NSN : 5905-01-319-9875 (5905013199875) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 94117 | ||
| NIIN : 01-319-9875 (013199875) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 228071P2, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Bae Systems Inc and listed alongside the NSN 5905013199875, part number 228071P2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 228071P2 | Manufacturer : Bae Systems Inc | ||
| NSN Number : 5905-01-319-9875 (5905013199875) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 94117 | ||
| NIIN : 013199875 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 228071P2, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Bae Systems Inc and listed alongside the NSN 5905013199875, part number 228071P2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-319-9875 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 013199875 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SPF-0R1J | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| ADAQ | BODY LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 2.000 FREE AIR |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| AAPP | ELECTRICAL RESISTANCE | 0.100 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1700.0 TO 1700.0 |
| ABJT | TERMINAL LENGTH | 0.374 INCHES MINIMUM AND 0.626 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.217 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 70.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | USM464 CTS |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 0.024 CUBIC INCHES |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| TEST | TEST DATA DOCUMENT | 94117-228071 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
