| Part Number : 12365278 | Manufacturer : Bae Systems Land And Armaments Inc | ||
| NSN : 4720-01-417-5862 (4720014175862) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 06085 | ||
| NIIN : 01-417-5862 (014175862) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 12365278, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Bae Systems Land And Armaments Inc and listed alongside the NSN 4720014175862, part number 12365278 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 12365278 | Manufacturer : Bae Systems Land And Armaments Inc | ||
| NSN Number : 4720-01-417-5862 (4720014175862) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 06085 | ||
| NIIN : 014175862 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 12365278, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Bae Systems Land And Armaments Inc and listed alongside the NSN 4720014175862, part number 12365278 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-417-5862 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014175862 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12365278 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B 1ST END |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.870 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| CRXX | MEASURING METHOD AND LENGTH | 16.250 INCHES NOMINAL OVERALL |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ADLG | (NON-CORE DATA) FIRST END FITTING SPEC/STD DATA | SAE J516, TABLE 4B-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| SR-1 | MANUFACTURERS CODE | 19207 |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQHW | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 12365278-40 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
