| Part Number : SR133W5DB0-11 | Manufacturer : Barden Corporation | ||
| NSN : 3110-01-186-2259 (3110011862259) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 70854 | ||
| NIIN : 01-186-2259 (011862259) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: SR133W5DB011 | |||
Thank you for taking an interest in part number SR133W5DB0-11, that of which is listed with the description Bearing Ball Duplex; Manufactured by Barden Corporation and listed alongside the NSN 3110011862259, part number SR133W5DB0-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SR133W5DB0-11 | Manufacturer : Barden Corporation | ||
| NSN Number : 3110-01-186-2259 (3110011862259) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 70854 | ||
| NIIN : 011862259 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SR133W5DB0-11, that of which is listed with the description Bearing Ball Duplex; Manufactured by Barden Corporation and listed alongside the NSN 3110011862259, part number SR133W5DB0-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-186-2259 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011862259 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SR1335K581 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.1245 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.0936 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.1874 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGAV | END ITEM IDENTIFICATION | G AND S SECTION AGM65D |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| FEAT | SPECIAL FEATURES | CAUTION SHALL BE TAKEN TO PREVENT CONTAMINATION OR SEPARATION OF MATCHED PAIRS |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL UNS K44220 SEPARATOR AND STEEL UNS K44315 SEPARATOR |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
