| Part Number : 04A061-05-028 | Manufacturer : Barden Corporation | ||
| NSN : 3120-01-335-7174 (3120013357174) | |||
| Item Name : Bearing Sleeve | CAGE Code : 70854 | ||
| NIIN : 01-335-7174 (013357174) | |||
| FSC Code : 3120 Bearings Plain Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 13205 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 04A06105028 | |||
Thank you for taking an interest in part number 04A061-05-028, that of which is listed with the description Bearing Sleeve; Manufactured by Barden Corporation and listed alongside the NSN 3120013357174, part number 04A061-05-028 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m touch systems inc
CAGE Code: 0A1V7 |
2eme regiment du materiel
CAGE Code: FARD5 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
4 cs electronic packaging inc
CAGE Code: 60744 |
|
360 tents l l c
CAGE Code: 4CT45 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
10zig technology inc
CAGE Code: 49E04 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3d
CAGE Code: 0WY47 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
3gen corporation
CAGE Code: 3SPS3 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
4 r electro systems
CAGE Code: 1T600 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
| Part Number : 04A061-05-028 | Manufacturer : Barden Corporation | ||
| NSN Number : 3120-01-335-7174 (3120013357174) | |||
| Item Name : Bearing Sleeve | CAGE Code : 70854 | ||
| NIIN : 013357174 | |||
| FSC CODE : 3120 Bearings Plain Unmounted | |||
Thank you for taking an interest in part number 04A061-05-028, that of which is listed with the description Bearing Sleeve; Manufactured by Barden Corporation and listed alongside the NSN 3120013357174, part number 04A061-05-028 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-335-7174 Item PartTypeName: BEARING,SLEEVE | 3120 | 013357174 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| KPD328-05-028 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| ABHP | OVERALL LENGTH | 0.3420 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.3020 INCHES MINIMUM AND 0.3030 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.7200 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
| ZZZK | SPECIFICATION/STANDARD DATA | 50632-04A061 MANUFACTURERS STANDARD |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE |
| ADAR | BODY OUTSIDE DIAMETER | 0.4381 INCHES MINIMUM AND 0.4387 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE |
| MATT | MATERIAL | STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
