Part Number : 93015-2 | Manufacturer : Barry Wright Corporation | ||
NSN : 5340-01-153-1283 (5340011531283) | |||
Item Name : Mount Resilient Utility | CAGE Code : 81860 | ||
NIIN : 01-153-1283 (011531283) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 53590 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 930152 |
Thank you for taking an interest in part number 93015-2, that of which is listed with the description Mount Resilient Utility; Manufactured by Barry Wright Corporation and listed alongside the NSN 5340011531283, part number 93015-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 93015-2 | Manufacturer : Barry Wright Corporation | ||
NSN Number : 5340-01-153-1283 (5340011531283) | |||
Item Name : Mount Resilient Utility | CAGE Code : 81860 | ||
NIIN : 011531283 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number 93015-2, that of which is listed with the description Mount Resilient Utility; Manufactured by Barry Wright Corporation and listed alongside the NSN 5340011531283, part number 93015-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-153-1283 Item PartTypeName: MOUNT,RESILIENT,UTILITY | 5340 | 011531283 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
12410369-1 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AARX | INSIDE DIAMETER | 0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
ABKU | FLANGE THICKNESS | 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.464 INCHES MINIMUM AND 1.474 INCHES MAXIMUM |
AFQN | FLANGE LENGTH | 1.875 INCHES NOMINAL |
AGFF | FLANGE WIDTH | 1.250 INCHES NOMINAL |
AYXK | MAXIMUM LOAD RATING | 9.0 POUNDS |
BXCD | DISTANCE FROM FLANGE TO END | 0.450 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | HOLES SLOTTED 0.118-0.123 IN. BY 0.215 IN.; MATCHED SET,4 ISOLATORS,SET SHALL BE FABRICATED USING SAME ELASTOMER LOT; INERTIAL PLATFORM ASSEMBLY,MX-9923/A |
HGTH | HEIGHT | 1.030 INCHES NOMINAL |
MATT | MATERIAL | ALUMINUM ALLOY MOUNTING FLANGE PLATE |
MATT | MATERIAL | STEEL CORROSION RESISTING OR ALUMINUM ALLOY BOLT |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BOLT |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING FLANGE PLATE |
SFTT | SURFACE TREATMENT | CHROMATE MOUNTING FLANGE PLATE |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE MOUNTING FLANGE PLATE |
STYL | STYLE DESIGNATOR | ROUND W/BUSHING TWO-HOLE FLANGE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote