| Part Number : TTN-A-2 | Manufacturer : Barry Wright Corporation | ||
| NSN : 5342-01-158-2186 (5342011582186) | |||
| Item Name : Mount Resilient | CAGE Code : 81860 | ||
| NIIN : 01-158-2186 (011582186) | |||
| FSC Code : 5342 Hardware Weapon System | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 53589 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TTNA2 | |||
Thank you for taking an interest in part number TTN-A-2, that of which is listed with the description Mount Resilient; Manufactured by Barry Wright Corporation and listed alongside the NSN 5342011582186, part number TTN-A-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TTN-A-2 | Manufacturer : Barry Wright Corporation | ||
| NSN Number : 5342-01-158-2186 (5342011582186) | |||
| Item Name : Mount Resilient | CAGE Code : 81860 | ||
| NIIN : 011582186 | |||
| FSC CODE : 5342 Hardware Weapon System | |||
Thank you for taking an interest in part number TTN-A-2, that of which is listed with the description Mount Resilient; Manufactured by Barry Wright Corporation and listed alongside the NSN 5342011582186, part number TTN-A-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5342-01-158-2186 Item PartTypeName: MOUNT,RESILIENT,WEAPON SYSTEM | 5342 | 011582186 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TTNA-2/07 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.164 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.937 INCHES NOMINAL |
| AFQN | FLANGE LENGTH | 2.380 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | MLRS,13029712 AND 13029710 |
| AGFF | FLANGE WIDTH | 2.380 INCHES NOMINAL |
| AYXK | MAXIMUM LOAD RATING | 60.0 POUNDS |
| BXCH | SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.937 INCHES NOMINAL |
| BXCQ | FLANGE MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL |
| BXCT | STATIC LOAD RATING AT SPECIFIED DEFLECTION | 10 TO 50 POUND LOAD RATING AT 0.050 TO 0.430 IN. DEFLECTION |
| BXCW | LOAD/FREQUENCY RANGE | 5 TO 10 POUND LOAD FOR 19 TO 14 HERTZ |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | TTA MOUNT SERIES |
| FEAT | SPECIAL FEATURES | THERE ARE TWO THREADED MTG HOLES IN TOP |
| HGTH | HEIGHT | 1.030 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OUTER MEMBER |
| MATT | MATERIAL | RUBBER NATURAL INNER MEMBER |
| SFTT | SURFACE TREATMENT | CHROMATE OUTER MEMBER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE OUTER MEMBER |
| STYL | STYLE DESIGNATOR | ROUND SPRING COMPRESSION FOUR-HOLE FLANGE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
