Part Number : WR1-040 | Manufacturer : Barry Wright Corporation | ||
NSN : 5365-01-156-6778 (5365011566778) | |||
Item Name : Bushing Nonmetallic | CAGE Code : 81860 | ||
NIIN : 01-156-6778 (011566778) | |||
FSC Code : 5365 Bushings Rings Shims and Spacers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 39929 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: WR1040 |
Thank you for taking an interest in part number WR1-040, that of which is listed with the description Bushing Nonmetallic; Manufactured by Barry Wright Corporation and listed alongside the NSN 5365011566778, part number WR1-040 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : WR1-040 | Manufacturer : Barry Wright Corporation | ||
NSN Number : 5365-01-156-6778 (5365011566778) | |||
Item Name : Bushing Nonmetallic | CAGE Code : 81860 | ||
NIIN : 011566778 | |||
FSC CODE : 5365 Bushings Rings Shims and Spacers |
Thank you for taking an interest in part number WR1-040, that of which is listed with the description Bushing Nonmetallic; Manufactured by Barry Wright Corporation and listed alongside the NSN 5365011566778, part number WR1-040 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5365-01-156-6778 Item PartTypeName: BUSHING,NONMETALLIC | 5365 | 011566778 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
WR1-040 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 0.250 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.812 INCHES NOMINAL |
ADYT | CENTER HOLE DIAMETER | 0.453 INCHES NOMINAL |
APGF | DESIGN TYPE | SINGLE CENTRALLY LOCATED HOLE |
FEAT | SPECIAL FEATURES | 8 FINGER EACH SIDE OUT OF PHASE,MAX LOAD 6 LBS,MIN LOAD 2LBS |
MATT | MATERIAL | RUBBER |
STYL | STYLE DESIGNATOR | ROUND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote