Part Number : 204 060 761 003 | Manufacturer : Bell Helicopter Textron Inc | ||
NSN : 1560-00-710-4432 (1560007104432) | |||
Item Name : Lever Remote Control | CAGE Code : 97499 | ||
NIIN : 00-710-4432 (007104432) | |||
FSC Code : 1560 Airframe Structural Components | |||
FSG Code : 15 Aircraft and Airframe Structural Components | |||
INC Code : 22099 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 204 060 761 003, that of which is listed with the description Lever Remote Control; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 1560007104432, part number 204 060 761 003 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 204 060 761 003 | Manufacturer : Bell Helicopter Textron Inc | ||
NSN Number : 1560-00-710-4432 (1560007104432) | |||
Item Name : Lever Remote Control | CAGE Code : 97499 | ||
NIIN : 007104432 | |||
FSC CODE : 1560 Airframe Structural Components |
Thank you for taking an interest in part number 204 060 761 003, that of which is listed with the description Lever Remote Control; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 1560007104432, part number 204 060 761 003 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
ABXV | BORE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM |
ADGE | BORE LENGTH | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | FUSELAGE SECTION, ACFT |
ASBP | BORE TYPE | PLAIN STRAIGHT |
BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.580 INCHES NOMINAL |
BFGX | SHAFT END THICKNESS | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
BFHA | LINK END HOLE DIAMETER | 0.1894 INCHES MINIMUM AND 0.1899 INCHES MAXIMUM |
BFHN | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
MATT | III MATERIAL | ALUMINUM ALLOY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-601, ALLOY 356 FED SPEC SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote