| Part Number : 206-001-185-1 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN : 3130-00-182-8628 (3130001828628) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 97499 | ||
| NIIN : 00-182-8628 (001828628) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 2060011851 | |||
Thank you for taking an interest in part number 206-001-185-1, that of which is listed with the description Bearing Unit Ball; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 3130001828628, part number 206-001-185-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 206-001-185-1 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN Number : 3130-00-182-8628 (3130001828628) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 97499 | ||
| NIIN : 001828628 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 206-001-185-1, that of which is listed with the description Bearing Unit Ball; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 3130001828628, part number 206-001-185-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-182-8628 Item PartTypeName: BEARING UNIT,BALL | 3130 | 001828628 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 206-001-185-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.055 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.075 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 2.335 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.830 INCHES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| FEAT | SPECIAL FEATURES | 2ND MTG HOLE 0.312 IN. DIA MI TO 0.313 IN. DIA MAX |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY 2014 HOUSING |
| MATT | MATERIAL | STEEL COMP E51100 BALL OR STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RACE |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING SEAL AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL OR STEEL CORROSION RESISTING SEAL AND GLASS FIBER SEAL AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ALIGNING RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD 1ST MATERIAL RESPONSE SEAL OR AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE HOUSING |
| SFTT | SURFACE TREATMENT | CADMIUM INNER RACE |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RACE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| TEST | TEST DATA DOCUMENT | 97499-BPS 4075 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
