| Part Number : 120-265V3A10 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN : 5305-01-520-9402 (5305015209402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 97499 | ||
| NIIN : 01-520-9402 (015209402) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 120265V3A10 | |||
Thank you for taking an interest in part number 120-265V3A10, that of which is listed with the description Screw Close Tolerance; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5305015209402, part number 120-265V3A10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 120-265V3A10 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN Number : 5305-01-520-9402 (5305015209402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 97499 | ||
| NIIN : 015209402 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 120-265V3A10, that of which is listed with the description Screw Close Tolerance; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5305015209402, part number 120-265V3A10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-520-9402 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015209402 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5315V3A10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| ANEE | GRIP LENGTH | 0.625 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASL | HEAD DIAMETER | 0.380 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALUMINUM PIGMENTED COATING PER NAS4006 FED SPEC 1ST TREATMENT RESPONSE AND CETYL ALCOHOL LUBRICANT PER MIL-L-87132, TYPE 3, GRADE B FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 0.901 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 3AL-4VAMS4928 FED SPEC 1ST MATERIAL RESPONSE OR AMS4967 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, FLAT 100 DEG HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASA | THREAD LENGTH | 0.260 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.189 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | THIS SCREW INTENDED FOR APPLICATIONS WHICH REQUIRE THE SIX LOBE RECESS; HAS UNDRILLED SHANK |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.163 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
