| Part Number : NAS5315V3A10 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN : 5305-01-520-9402 (5305015209402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 97499 | ||
| NIIN : 01-520-9402 (015209402) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS5315V3A10, that of which is listed with the description Screw Close Tolerance; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5305015209402, part number NAS5315V3A10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS5315V3A10 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN Number : 5305-01-520-9402 (5305015209402) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 97499 | ||
| NIIN : 015209402 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS5315V3A10, that of which is listed with the description Screw Close Tolerance; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5305015209402, part number NAS5315V3A10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-520-9402 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015209402 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5315V3A10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| ANEE | GRIP LENGTH | 0.625 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASL | HEAD DIAMETER | 0.380 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALUMINUM PIGMENTED COATING PER NAS4006 FED SPEC 1ST TREATMENT RESPONSE AND CETYL ALCOHOL LUBRICANT PER MIL-L-87132, TYPE 3, GRADE B FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 0.901 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 3AL-4VAMS4928 FED SPEC 1ST MATERIAL RESPONSE OR AMS4967 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, FLAT 100 DEG HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASA | THREAD LENGTH | 0.260 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.189 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | THIS SCREW INTENDED FOR APPLICATIONS WHICH REQUIRE THE SIX LOBE RECESS; HAS UNDRILLED SHANK |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.163 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
