| Part Number : 212-010-411-3 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN : 5306-01-010-9593 (5306010109593) | |||
| Item Name : Bolt Machine | CAGE Code : 97499 | ||
| NIIN : 01-010-9593 (010109593) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01847 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2120104113 | |||
Thank you for taking an interest in part number 212-010-411-3, that of which is listed with the description Bolt Machine; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5306010109593, part number 212-010-411-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 212-010-411-3 | Manufacturer : Bell Helicopter Textron Inc | ||
| NSN Number : 5306-01-010-9593 (5306010109593) | |||
| Item Name : Bolt Machine | CAGE Code : 97499 | ||
| NIIN : 010109593 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 212-010-411-3, that of which is listed with the description Bolt Machine; Manufactured by Bell Helicopter Textron Inc and listed alongside the NSN 5306010109593, part number 212-010-411-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-010-9593 Item PartTypeName: BOLT,MACHINE | 5306 | 010109593 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 212-010-411-3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.416 INCHES MINIMUM AND 0.426 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 6.343 INCHES MINIMUM AND 6.373 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| ANEE | GRIP LENGTH | 5.927 INCHES MINIMUM AND 5.947 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM TOP OF HEAD AND 40.0 ROCKWELL C MAXIMUM TOP OF HEAD |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 6.187 INCHES MINIMUM FIRST HOLE AND 6.189 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BPS 4006,TYPE 2,CLASS 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
