Part Number : T56-10 | Manufacturer : Bendix Corp | ||
NSN : 5310-00-291-9869 (5310002919869) | |||
Item Name : Washer Flat | CAGE Code : 76126 | ||
NIIN : 00-291-9869 (002919869) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 13393 | |||
NCB Code : 00 | Country : USA | ||
Alternate P/N: T5610 |
Thank you for taking an interest in part number T56-10, that of which is listed with the description Washer Flat; Manufactured by Bendix Corp and listed alongside the NSN 5310002919869, part number T56-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : T56-10 | Manufacturer : Bendix Corp | ||
NSN Number : 5310-00-291-9869 (5310002919869) | |||
Item Name : Washer Flat | CAGE Code : 76126 | ||
NIIN : 002919869 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number T56-10, that of which is listed with the description Washer Flat; Manufactured by Bendix Corp and listed alongside the NSN 5310002919869, part number T56-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-291-9869 Item PartTypeName: WASHER,FLAT | 5310 | 002919869 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | ||||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
224148 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
AAUB | HOLE DIAMETER | 0.500 INCHES NOMINAL |
ABMW | PERIPHERAL SHAPE STYLE | ROUND |
ABMX | CENTER HOLE SHAPE STYLE | ROUND |
ABNM | THICKNESS | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
ADAV | OVERALL DIAMETER | 0.750 INCHES NOMINAL |
CQBC | MINIMUM TENSILE STRENGTH | 6000 POUNDS PER SQUARE INCH |
MATT | MATERIAL | CELLULOSE OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-12803,TYPE 3,NO. 3200-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote