| Part Number : NL7233-1447-0 | Manufacturer : Bi Technologies Corporation | ||
| NSN : 5905-01-325-1966 (5905013251966) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 73138 | ||
| NIIN : 01-325-1966 (013251966) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NL723314470 | |||
Thank you for taking an interest in part number NL7233-1447-0, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bi Technologies Corporation and listed alongside the NSN 5905013251966, part number NL7233-1447-0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NL7233-1447-0 | Manufacturer : Bi Technologies Corporation | ||
| NSN Number : 5905-01-325-1966 (5905013251966) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 73138 | ||
| NIIN : 013251966 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number NL7233-1447-0, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bi Technologies Corporation and listed alongside the NSN 5905013251966, part number NL7233-1447-0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-325-1966 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 013251966 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 64A7A39-1 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.891 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.043 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION EQUATION |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| CBME | CUBIC MEASURE | 1.273 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | EXTERNAL JUMPER WIRE BETWEEN SECTIONS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 MINIMUM AND 1090.0 MAXIMUM |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| TEST | TEST DATA DOCUMENT | 10001-64A7A39 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0520 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1079.0 MINIMUM AND 1081.0 MAXIMUM |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AGAV | END ITEM IDENTIFICATION | WALLEYE MK 64 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.1 TO 0.1 OHMS ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 500.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
