Part Number : K3213-1 | Manufacturer : Bliley Technologies Incorporated | ||
NSN : 5955-01-399-7268 (5955013997268) | |||
Item Name : Crystal Unit Quartz | CAGE Code : 71034 | ||
NIIN : 01-399-7268 (013997268) | |||
FSC Code : 5955 Oscillators and Piezoelectric Crystals | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 00196 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: K32131 |
Thank you for taking an interest in part number K3213-1, that of which is listed with the description Crystal Unit Quartz; Manufactured by Bliley Technologies Incorporated and listed alongside the NSN 5955013997268, part number K3213-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : K3213-1 | Manufacturer : Bliley Technologies Incorporated | ||
NSN Number : 5955-01-399-7268 (5955013997268) | |||
Item Name : Crystal Unit Quartz | CAGE Code : 71034 | ||
NIIN : 013997268 | |||
FSC CODE : 5955 Oscillators and Piezoelectric Crystals |
Thank you for taking an interest in part number K3213-1, that of which is listed with the description Crystal Unit Quartz; Manufactured by Bliley Technologies Incorporated and listed alongside the NSN 5955013997268, part number K3213-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5955-01-399-7268 Item PartTypeName: CRYSTAL UNIT,QUARTZ | 5955 | 013997268 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
7 | A | G | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
10133022 | 5 | 9 | 6 |
MRC | Criteria | Characteristic |
---|---|---|
AEBT | TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
ABJT | TERMINAL LENGTH | 0.500 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
STYL | STYLE DESIGNATOR | HAT TYPE, 3 WIRE LEADS |
AGAV | III END ITEM IDENTIFICATION | F/A-18 RADAR, CAGE 76301 |
ABHP | OVERALL LENGTH | 0.220 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 55.0 NOMINAL |
AEHG | SPECIFIED FREQUENCY | 100.3275 MEGAHERTZ |
AEHC | MODE OF OSCILLATION | FIFTH OVERTONE |
AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
AEHF | SHUNT CAPACITANCE IN PICOFARADS | 2.8 MINIMUM AND 4.8 MAXIMUM |
CQYL | DRIVE LEVEL RATING | 0.3 MILLIWATTS MINIMUM AND 0.5 MILLIWATTS MAXIMUM |
PRMT | III PRECIOUS MATERIAL | GOLD |
AFGA | OPERATING TEMP RANGE | -55.0 TO 105.0 DEG CELSIUS |
AEHS | HOLDER COVER MATERIAL | METAL |
ZZZK | SPECIFICATION/STANDARD DATA | 82577-8000132-001T MANUFACTURERS SPECIFICATION CONTROL |
TEST | TEST DATA DOCUMENT | 82577-8000132 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
ADAV | OVERALL DIAMETER | 0.420 INCHES MAXIMUM |
CQBK | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
ABMZ | DIAMETER | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0035 TO 0.0035 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote