| Part Number : 7S37-3-8 | Manufacturer : Boeing Company The | ||
| NSN : 5305-00-458-1874 (5305004581874) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 43999 | ||
| NIIN : 00-458-1874 (004581874) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 7S3738 | |||
Thank you for taking an interest in part number 7S37-3-8, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305004581874, part number 7S37-3-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7S37-3-8 | Manufacturer : Boeing Company The | ||
| NSN Number : 5305-00-458-1874 (5305004581874) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 43999 | ||
| NIIN : 004581874 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 7S37-3-8, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305004581874, part number 7S37-3-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-458-1874 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 004581874 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7S37-3-8 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.632 INCHES MINIMUM FIRST HOLE AND 0.682 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
