| Part Number : 7S28A6-17 | Manufacturer : Boeing Company The | ||
| NSN : 5305-00-819-9842 (5305008199842) | |||
| Item Name : Screw Machine | CAGE Code : 43999 | ||
| NIIN : 00-819-9842 (008199842) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 7S28A617 | |||
Thank you for taking an interest in part number 7S28A6-17, that of which is listed with the description Screw Machine; Manufactured by Boeing Company The and listed alongside the NSN 5305008199842, part number 7S28A6-17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7S28A6-17 | Manufacturer : Boeing Company The | ||
| NSN Number : 5305-00-819-9842 (5305008199842) | |||
| Item Name : Screw Machine | CAGE Code : 43999 | ||
| NIIN : 008199842 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 7S28A6-17, that of which is listed with the description Screw Machine; Manufactured by Boeing Company The and listed alongside the NSN 5305008199842, part number 7S28A6-17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-819-9842 Item PartTypeName: SCREW,MACHINE | 5305 | 008199842 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7S28A6-17 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6098 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.687 INCHES MINIMUM AND 1.734 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE SET |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 8735 OR STEEL COMP 3135 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBK | SHANK SURFACE FINISH | 32.0 MICROINCHES |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
