| Part Number : LE111 0001 4014 | Manufacturer : Boeing Company The | ||
| NSN : 5305-01-283-9899 (5305012839899) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 43999 | ||
| NIIN : 01-283-9899 (012839899) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number LE111 0001 4014, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305012839899, part number LE111 0001 4014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LE111 0001 4014 | Manufacturer : Boeing Company The | ||
| NSN Number : 5305-01-283-9899 (5305012839899) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 43999 | ||
| NIIN : 012839899 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number LE111 0001 4014, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305012839899, part number LE111 0001 4014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-283-9899 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012839899 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FIT01-0001-4014 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.401 INCHES MINIMUM AND 1.421 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN NO. 2 |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | THREE KEYWAYS 1.371 INCH MIN. AND 1.391 INCH MAX. LONG AND 0.040 INCH MIN. AND 0.044 INCH MAX. WIDE; HOLE AT THREADED END WITH DIA. REAMED TO ACCEPT PLUG |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
