| Part Number : 3M927-4DL17 | Manufacturer : Boeing Company The | ||
| NSN : 5305-01-509-6354 (5305015096354) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 76301 | ||
| NIIN : 01-509-6354 (015096354) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M9274DL17 | |||
Thank you for taking an interest in part number 3M927-4DL17, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305015096354, part number 3M927-4DL17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2415779 ontario inc
CAGE Code: L09L7 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
400hz repair
CAGE Code: 03MS6 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
31 mile equipment co
CAGE Code: 07PE3 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
3m france
CAGE Code: F0347 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
3m alaska
CAGE Code: 0NZU5 |
|
3 l filters ltd
CAGE Code: 37941 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
3d evolution ltd
CAGE Code: KD959 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3g shielding specialties lp
CAGE Code: 7PCU6 |
| Part Number : 3M927-4DL17 | Manufacturer : Boeing Company The | ||
| NSN Number : 5305-01-509-6354 (5305015096354) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 76301 | ||
| NIIN : 015096354 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M927-4DL17, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305015096354, part number 3M927-4DL17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-509-6354 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015096354 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4069-4D17A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | LANDING GEAR |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE |
| AASB | FASTENER LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.629 INCHES MINIMUM AND 0.639 INCHES MAXIMUM FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-83488, TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.398 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| AAJD | THREAD CLASS | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
