| Part Number : 3M927-5L11 | Manufacturer : Boeing Company The | ||
| NSN : 5305-01-627-2954 (5305016272954) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 76301 | ||
| NIIN : 01-627-2954 (016272954) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M9275L11 | |||
Thank you for taking an interest in part number 3M927-5L11, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305016272954, part number 3M927-5L11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M927-5L11 | Manufacturer : Boeing Company The | ||
| NSN Number : 5305-01-627-2954 (5305016272954) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 76301 | ||
| NIIN : 016272954 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M927-5L11, that of which is listed with the description Screw Close Tolerance; Manufactured by Boeing Company The and listed alongside the NSN 5305016272954, part number 3M927-5L11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-627-2954 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016272954 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4069-5-11A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.531 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.219 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.429 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.071 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAUY | POINT LENGTH | 0.052 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AGAV | III END ITEM IDENTIFICATION | F-15SA |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| ANEE | GRIP LENGTH | 0.688 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.095 INCHES MINIMUM AND 1.105 INCHES MAXIMUM THREADS |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE, 100 DEG C'SUNK, HI-TORQUE, REDUCED HEAD |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
