| Part Number : 9M702-5B14 | Manufacturer : Boeing Company The | ||
| NSN : 5340-01-509-9279 (5340015099279) | |||
| Item Name : Clamp Block Section | CAGE Code : 76301 | ||
| NIIN : 01-509-9279 (015099279) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 39404 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 9M7025B14 | |||
Thank you for taking an interest in part number 9M702-5B14, that of which is listed with the description Clamp Block Section; Manufactured by Boeing Company The and listed alongside the NSN 5340015099279, part number 9M702-5B14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9M702-5B14 | Manufacturer : Boeing Company The | ||
| NSN Number : 5340-01-509-9279 (5340015099279) | |||
| Item Name : Clamp Block Section | CAGE Code : 76301 | ||
| NIIN : 015099279 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 9M702-5B14, that of which is listed with the description Clamp Block Section; Manufactured by Boeing Company The and listed alongside the NSN 5340015099279, part number 9M702-5B14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-509-9279 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 015099279 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8M702-5B14 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| SUPP | Supplementary Features | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)_ |
| STYL | Style Designator | RECTANGULAR |
| MATT | Material | PLASTIC |
| CWWM | Clamping Hole Diameter | 0.766 INCHES NOMINAL ALL HOLES |
| CWXN | Distance From End To First Clamping Hole Center | 0.218 INCHES NOMINAL |
| CWTD | Clamping Hole Quantity | 2 |
| FEAT | Special Features | MATL NYLON GLASS PER P.S. 14280,GRADE B,CLASS2 |
| CWXZ | Center To Center Distance Between First And Second Clamping Holes | 1.687 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | CLAMP,BLOCK-TUBE SUPPORT,PLASTIC |
| ABMK | Overall Width | 0.575 INCHES NOMINAL |
| ABHP | Overall Length | 3.187 INCHES NOMINAL |
| AXPE | Center To Center Distance Between First And Third Mounting Holes | 1.375 INCHES NOMINAL |
| AXPC | Center To Center Distance Between First And Second Mounting Holes | 1.375 INCHES NOMINAL |
| ABTB | Mounting Hole Diameter | 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| AZGM | Mounting Facility | UNTHREADED HOLE |
| ABTJ | Mounting Hole Quantity | 2 |
| AFEC | Distance From Center Of Mounting Hole To Edge Along The Width | 0.283 INCHES NOMINAL |
| AGAV | End Item Identification | F18 E/F |
| BYGG | Block Height | 0.630 INCHES NOMINAL |
| CWXC | Distance From End To First Mounting Hole Center | 0.218 INCHES NOMINAL |
| CRTL | Criticality Code Justification | AGAV |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
