| Part Number : C4CM1419-1 | Manufacturer : Bombardier Aerospace | ||
| NSN : 5310-00-898-1741 (5310008981741) | |||
| Item Name : Nut Plain Round | CAGE Code : 71867 | ||
| NIIN : 00-898-1741 (008981741) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: C4CM14191 | |||
Thank you for taking an interest in part number C4CM1419-1, that of which is listed with the description Nut Plain Round; Manufactured by Bombardier Aerospace and listed alongside the NSN 5310008981741, part number C4CM1419-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C4CM1419-1 | Manufacturer : Bombardier Aerospace | ||
| NSN Number : 5310-00-898-1741 (5310008981741) | |||
| Item Name : Nut Plain Round | CAGE Code : 71867 | ||
| NIIN : 008981741 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number C4CM1419-1, that of which is listed with the description Nut Plain Round; Manufactured by Bombardier Aerospace and listed alongside the NSN 5310008981741, part number C4CM1419-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-898-1741 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 008981741 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C4CM1419-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWY | COUNTERBORE DIAMETER | 0.900 INCHES NOMINAL BOSS |
| ABPH | SMALL END DIAMETER | 1.000 INCHES NOMINAL |
| ABQU | DRIVE POINT DEPTH | 0.120 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 1.120 INCHES NOMINAL |
| ADBG | NUT THICKNESS | 0.450 INCHES NOMINAL |
| ADBH | DRIVE POINT WIDTH | 0.180 NOMINAL INCHES |
| ADBJ | UNDERCUT THICKNESS | 0.200 NOMINAL INCHES |
| ADBM | DRIVE POINT QUANTITY | 4 |
| ADFK | NUT COUNTERBORE DEPTH | 0.150 INCHES NOMINAL BOSS |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL FLANGE |
| FEAT | SPECIAL FEATURES | SQUARE GROOVE,0.065 IN.WIDE AND 0.060 IN.DEEP,CENTERED ON FLANGE EDGE |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
