| Part Number : 3329W | Manufacturer : Bourns Instruments Inc | ||
| NSN : 5905-00-154-7025 (5905001547025) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : K5743 | ||
| NIIN : 00-154-7025 (001547025) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3329W, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905001547025, part number 3329W is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3329W | Manufacturer : Bourns Instruments Inc | ||
| NSN Number : 5905-00-154-7025 (5905001547025) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : K5743 | ||
| NIIN : 001547025 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 3329W, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905001547025, part number 3329W is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-154-7025 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 001547025 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3329W-1-501 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.312 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.245 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.290 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.360 INCHES NOMINAL |
| AEDZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 240.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 260.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TEST | TEST DATA DOCUMENT | 30890-40-001030 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
