| Part Number : 3683S-1-105 | Manufacturer : Bourns Instruments Inc | ||
| NSN : 5905-01-137-1606 (5905011371606) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 3Z867 | ||
| NIIN : 01-137-1606 (011371606) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37407 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3683S1105 | |||
Thank you for taking an interest in part number 3683S-1-105, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905011371606, part number 3683S-1-105 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3683S-1-105 | Manufacturer : Bourns Instruments Inc | ||
| NSN Number : 5905-01-137-1606 (5905011371606) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 3Z867 | ||
| NIIN : 011371606 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 3683S-1-105, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905011371606, part number 3683S-1-105 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-137-1606 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011371606 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C11099-1-105 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.455 INCHES MINIMUM AND 1.465 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.805 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.045 INCHES MINIMUM AND 1.055 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 1.259 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81755-C11099 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
