| Part Number : 3500S-D55-303 | Manufacturer : Bourns Instruments Inc | ||
| NSN : 5905-01-316-8946 (5905013168946) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 80294 | ||
| NIIN : 01-316-8946 (013168946) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3500SD55303 | |||
Thank you for taking an interest in part number 3500S-D55-303, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905013168946, part number 3500S-D55-303 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3500S-D55-303 | Manufacturer : Bourns Instruments Inc | ||
| NSN Number : 5905-01-316-8946 (5905013168946) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 80294 | ||
| NIIN : 013168946 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 3500S-D55-303, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905013168946, part number 3500S-D55-303 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-316-8946 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 013168946 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 579R898H10 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 5840-01-020-5631 RADAR SET |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | 0.608 CUBIC INCHES |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20/0.20 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| TEST | TEST DATA DOCUMENT | 97942-579R898 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| ABPM | BODY DIAMETER | 0.860 NOMINAL MILS AND 0.900 NOMINAL CENTIMETERS |
| ADAQ | BODY LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 96.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/3.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
