| Part Number : 3250W-1-202M | Manufacturer : Bourns Instruments Inc | ||
| NSN : 5905-01-463-4482 (5905014634482) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 32997 | ||
| NIIN : 01-463-4482 (014634482) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3250W1202M | |||
Thank you for taking an interest in part number 3250W-1-202M, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905014634482, part number 3250W-1-202M is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3250W-1-202M | Manufacturer : Bourns Instruments Inc | ||
| NSN Number : 5905-01-463-4482 (5905014634482) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 32997 | ||
| NIIN : 014634482 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 3250W-1-202M, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Bourns Instruments Inc and listed alongside the NSN 5905014634482, part number 3250W-1-202M is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-463-4482 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 014634482 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3250W-1-202M | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ADAU | BODY HEIGHT | 0.590 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| APXH | TERMINAL LOCATION | REAR END |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | III CUBIC MEASURE | 0.106 CUBIC INCHES |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 MAXIMUM |
| TEST | TEST DATA DOCUMENT | 80063-SM-A838760 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ADAT | BODY WIDTH | 0.300 INCHES NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.128 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.250 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/BUSHING/SLOT MOUNTED |
| AJYN | SCREW THREAD DIAMETER | 0.203 INCHES NOMINAL |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.400 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.500 INCHES MINIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ZZZK | SPECIFICATION/STANDARD DATA | SM-A-838760-1 GOVERNMENT SPECIFICATION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
