| Part Number : D10-09-256 | Manufacturer : Bowmar Llc | ||
| NSN : 5905-00-126-1552 (5905001261552) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 00-126-1552 (001261552) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: D1009256 | |||
Thank you for taking an interest in part number D10-09-256, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905001261552, part number D10-09-256 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
4 m company inc
CAGE Code: 1K407,57268 |
|
3m co health care services sales
CAGE Code: 0Z2D0 |
4 r electro systems
CAGE Code: 1T600 |
|
184th air refueling wing
CAGE Code: 3EP27 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
3dbm co inc
CAGE Code: 31791,62874 |
3gen corporation
CAGE Code: 3SPS3 |
|
4dsp llc
CAGE Code: 31UJ9 |
5605 n illinois inc
CAGE Code: 089F4 |
|
400hz repair
CAGE Code: 03MS6 |
3com sas
CAGE Code: F9930 |
|
101communications inc
CAGE Code: 1WS16 |
2m machining and manufacturing
CAGE Code: 6Y604 |
|
5s components inc
CAGE Code: 1LNJ8 |
| Part Number : D10-09-256 | Manufacturer : Bowmar Llc | ||
| NSN Number : 5905-00-126-1552 (5905001261552) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 001261552 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number D10-09-256, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905001261552, part number D10-09-256 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-126-1552 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 001261552 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 502-5002 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.157 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 4.501 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.096 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.70 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 50.0 KILOHMS 2ND SECTION AND 15.0 OHMS 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION AND-0.10 TO 0.10 2ND SECTION AND-1.00 TO 1.00 3RD SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 OHMS ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 1ST SECTION AND-3.0 TO 3.0 2ND SECTION AND-5.0 TO 5.0 3RD SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 1ST SECTION AND 25000.0 2ND SECTION AND 7.5 3RD SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
