| Part Number : D10-09-136 | Manufacturer : Bowmar Llc | ||
| NSN : 5905-00-779-5267 (5905007795267) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 00-779-5267 (007795267) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: D1009136 | |||
Thank you for taking an interest in part number D10-09-136, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905007795267, part number D10-09-136 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
498 msug
CAGE Code: 5VW08 |
3w interface corp
CAGE Code: 4V367 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3s group inc
CAGE Code: 07CN0 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
3m purification pty limited
CAGE Code: Z5295 |
|
3d
CAGE Code: 0WY47 |
3m deutschland gmbh
CAGE Code: D2607 |
|
2709th af vehicle control group
CAGE Code: 10994 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
21st century electronics inc
CAGE Code: 60092 |
|
4m sigma corporation
CAGE Code: 0BC31 |
| Part Number : D10-09-136 | Manufacturer : Bowmar Llc | ||
| NSN Number : 5905-00-779-5267 (5905007795267) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 007795267 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number D10-09-136, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905007795267, part number D10-09-136 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-779-5267 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 007795267 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D10-09-136 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.431 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.900 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.455 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.90 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 1ST SECTION AND 5.000 KILOHMS 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -3.50 TO 3.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -600.0 TO 600.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
