| Part Number : D10-09-112 | Manufacturer : Bowmar Llc | ||
| NSN : 5905-00-865-9284 (5905008659284) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 00-865-9284 (008659284) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: D1009112 | |||
Thank you for taking an interest in part number D10-09-112, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905008659284, part number D10-09-112 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1st american metals inc
CAGE Code: 0MP49 |
3 phoenix inc
CAGE Code: 3NJE3 |
|
21st century electronics inc
CAGE Code: 60092 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
3m alaska
CAGE Code: 0NZU5 |
|
4 r electro systems
CAGE Code: 1T600 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
3m unitek corporation
CAGE Code: 90444 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
3m norge a s
CAGE Code: N0447 |
31 mile equipment co
CAGE Code: 07PE3 |
|
10zig technology inc
CAGE Code: 49E04 |
| Part Number : D10-09-112 | Manufacturer : Bowmar Llc | ||
| NSN Number : 5905-00-865-9284 (5905008659284) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 99957 | ||
| NIIN : 008659284 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number D10-09-112, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Bowmar Llc and listed alongside the NSN 5905008659284, part number D10-09-112 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-865-9284 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008659284 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MD09-10-10-2236 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.060 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.880 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.440 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.300 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.003 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3780.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 3333.0 1ST SECTION AND 10000.0 2ND SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 06481-900217-227 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
