Part Number : 3-6-8S56 | Manufacturer : C E Conover And Co Inc | ||
NSN : 5331-00-828-8059 (5331008288059) | |||
Item Name : O Ring | CAGE Code : 07060 | ||
NIIN : 00-828-8059 (008288059) | |||
FSC Code : 5331 O Ring | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 47946 | |||
NCB Code : 00 | Country : USA | ||
Alternate P/N: 368S56 |
Thank you for taking an interest in part number 3-6-8S56, that of which is listed with the description O Ring; Manufactured by C E Conover And Co Inc and listed alongside the NSN 5331008288059, part number 3-6-8S56 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 3-6-8S56 | Manufacturer : C E Conover And Co Inc | ||
NSN Number : 5331-00-828-8059 (5331008288059) | |||
Item Name : O Ring | CAGE Code : 07060 | ||
NIIN : 008288059 | |||
FSC CODE : 5331 O Ring |
Thank you for taking an interest in part number 3-6-8S56, that of which is listed with the description O Ring; Manufactured by C E Conover And Co Inc and listed alongside the NSN 5331008288059, part number 3-6-8S56 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5331-00-828-8059 Item PartTypeName: O-RING | 5331 | 008288059 | Y | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3-906 L610-80 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ADVN | CROSS-SECTIONAL HEIGHT | 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
ADYT | CENTER HOLE DIAMETER | 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 80.0 SHORE DUROMETER A NOMINAL |
MATT | MATERIAL | RUBBER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | -4603 MFR REF SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote