| Part Number : CL117E | Manufacturer : Caro Inc | ||
| NSN : 3416-00-102-4269 (3416001024269) | |||
| Item Name : Lathe Engine | CAGE Code : 55985 | ||
| NIIN : 00-102-4269 (001024269) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number CL117E, that of which is listed with the description Lathe Engine; Manufactured by Caro Inc and listed alongside the NSN 3416001024269, part number CL117E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CL117E | Manufacturer : Caro Inc | ||
| NSN Number : 3416-00-102-4269 (3416001024269) | |||
| Item Name : Lathe Engine | CAGE Code : 55985 | ||
| NIIN : 001024269 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number CL117E, that of which is listed with the description Lathe Engine; Manufactured by Caro Inc and listed alongside the NSN 3416001024269, part number CL117E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 2 |
| ADQR | CENTER TO CENTER DISTANCE | 57.000 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| AWHA | BED TYPE | SOLID |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTD | RATED SWING | 11.125 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| ELEC | VOLTAGE IN VOLTS | 208 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BTSZ,BTTB,ASHK,ELEC,FAAZ,FEAT |
| FEAT | SPECIAL FEATURES | COOLANT SYSTEM,FUNGUS RESISTANCE,STEEL CHUCK BODIES,RADIO INTERFERENCE SUPPRESSION |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | II TYPE |
| APGF | DESIGN TYPE | SCREW |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | BTTD,ADQR,AKYD |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FAAZ | PHASE | THREE |
| BTTB | SPINDLE SPEED RANGE IN RPM | +30.0 TO 980.0 |
| BTTF | ACTUAL SWING OVER BED | 16.250 INCHES NOMINAL |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| BTTG | SWING OVER CROSS SLIDE | 9.625 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 MORSE |
| BTYQ | CARRIAGE QUANTITY | 1 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTZR | THREAD QUANTITY RANGE | +4.0 TO 224.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
