| Part Number : 4B7785 | Manufacturer : Caterpillar Inc | ||
| NSN : 3020-00-200-2050 (3020002002050) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 00-200-2050 (002002050) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4B7785, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020002002050, part number 4B7785 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4B7785 | Manufacturer : Caterpillar Inc | ||
| NSN Number : 3020-00-200-2050 (3020002002050) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 002002050 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 4B7785, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020002002050, part number 4B7785 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2050 Item PartTypeName: GEAR,HELICAL | 3020 | 002002050 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4B7785 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 3.1115 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 28 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 22.8 ROCKWELL C MINIMUM OVERALL AND 29.9 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.309 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 25.8581 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.248 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.625 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.499 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.189 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.847 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.250 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK LETTER C ON TEETH 134 DEG 59MIN 53 SECCCW FROM TIMING MARK LETTER M BETWEEN TEETH ONCENTER LINE OF KEYWAY ON HUB END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
