| Part Number : 6B6912 | Manufacturer : Caterpillar Inc | ||
| NSN : 3020-00-423-9864 (3020004239864) | |||
| Item Name : Gear Worm | CAGE Code : 11083 | ||
| NIIN : 00-423-9864 (004239864) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05467 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6B6912, that of which is listed with the description Gear Worm; Manufactured by Caterpillar Inc and listed alongside the NSN 3020004239864, part number 6B6912 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
3d
CAGE Code: 0WY47 |
|
2709th af vehicle control group
CAGE Code: 10994 |
498 msug
CAGE Code: 5VW08 |
|
3w interface corp
CAGE Code: 4V367 |
2 mb distribution
CAGE Code: FAH01 |
|
184th air refueling wing
CAGE Code: 3EP27 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
3m medical imaging
CAGE Code: 0ZRE5 |
3m purification pty limited
CAGE Code: Z5295 |
|
3d safety services pty ltd
CAGE Code: Z2JB4 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3m health care service center
CAGE Code: 0UTW7 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
4 ld inc
CAGE Code: 0ACW5 |
| Part Number : 6B6912 | Manufacturer : Caterpillar Inc | ||
| NSN Number : 3020-00-423-9864 (3020004239864) | |||
| Item Name : Gear Worm | CAGE Code : 11083 | ||
| NIIN : 004239864 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 6B6912, that of which is listed with the description Gear Worm; Manufactured by Caterpillar Inc and listed alongside the NSN 3020004239864, part number 6B6912 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-423-9864 Item PartTypeName: GEAR,WORM | 3020 | 004239864 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6B6912 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS |
| AGJS | PITCH DIAMETER | 4.0000 INCHES NOMINAL |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 4.569 INCHES |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | LEFT-HAND |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 4.1000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.094 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 4.815 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 3.000 INCHES BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 1115 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
